Minimum Spend Rm60 Store Wide Discount 10% Off Payment Method
Cart 0

WIFI Range Repeater 1200M dual frequency WIFI 5G/2.4G wireless signal expansion amplifier

RM 129.00
Whatsapp us

Product specifications

Product model: WD-R1203U

Product color: white and black

Product material: ABS+PC material

Transmission rate: 1200Mbps

Bare metal weight: 127g

Full set weight: 177.5g

Product size: 82x72x55mm

Packing size: 90x75x78mm

Product agreement: 5GHz11ac: Up to 867Mbps(dynamic).11a: Up to 54Mbps(dynamic)

Product accessories: 1* repeater 1* English manual 

2.4GHz11n: Up to 300Mbps(dynamic).11g: Up to 54Mbps(dynamic).11b: Up to 11Mbps(dynamic).

Product function: WiFi signal extension, L-port WiFi signal transmission, wireless to wired.

Compliant with 5G: IEEE802.11a (54Mbps), IEEE802.11ac (867Mbps)

2.4G: IEEE802.11b (11Mbps), IEEE802.11g (54Mbps), IEEE802.11n (300Mbps) standards, plug-in design.

Signal frequency: 2.4GSSID: Wifi-2.4G-XXXX

Signal frequency: 5GSSID: Wifi5G-XXXX

IP address: 192.168.188.1

Password: admin

Step-by-step connection instructions for 1200m-wifi amplifier

1. First look at the last four digits of MAC on the back of the amplifier, this is the amplifier name number

2. Plug in the power supply and turn on the 1st and 4th lights

3. After waiting for one minute, start setting when the second, third and fourth lights are on

4. Open the phone settings, enter WLAN, connect the amplifier name number WIFI_XXXX

5. The mobile phone has been connected to the amplifier WIFI_XXXX, and the current WLAN is not available for Internet access

6. Open the mobile browser, enter 192.168.188.1, you can choose Chinese display

7. Enter the password admin to log in, and successfully enter the amplifier management interface

8. Find the name of the WIFI you want to enlarge (your original WIFI name)

9. Enter the password of the WIFI you want to enlarge (the password of your original WIFI)

10. Set the expanded WIFI name and password of the amplifier (you can not modify it)

11. Click to start the connection, wait for one minute, observe that all 4 indicators light up, the setting is complete

12. Return to the phone settings, enter the WLAN, click to connect to your original WIFI name-pro-5G this number to complete the connection

If your router has a WPS button, you can plug in the WIFI amplifier, first press the WPS button of the router, and then press the WPS button of the WIFI amplifier, wait for 2 minutes to connect.

If you can’t find the amplifier name number, you can reset it. After plugging in the amplifier, use the configured pin to insert the small hole on the bottom of the amplifier for 10 seconds. After the indicator light changes, the factory settings are restored and the name number is searched, or long press Amplifier WPS button for 10 seconds, release it for a few seconds, wait until the indicator light changes to complete the factory reset and then search for the name number


SHIPPING

Once your order placed before 2 pm shipping on same day thereafter will be ship within 24 hours (not included public holiday). Thank for your purchase !